Guy Fredrickson's Discussions (812)

Discussions Replied To (810) Replies Latest Activity

"Tungsten, Thanks for the advice, it was useful. Months ago I emailed the following…"

Guy Fredrickson replied Mar 30, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"The top surfaces of the deck plates are ready for anti-slip Durabak-18.  Tonight I s…"

Guy Fredrickson replied Mar 27, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"This is what we are talking about, right? "

Guy Fredrickson replied Mar 26, 2013 to Orvis Drift boat

23 Mar 30, 2013
Reply by Phillip Westendorf

"I have to agree with Tungsten. I just don't see any aesthetic beauty inthe thing.  N…"

Guy Fredrickson replied Mar 26, 2013 to Orvis Drift boat

23 Mar 30, 2013
Reply by Phillip Westendorf

"Dave, Good work! Guy"

Guy Fredrickson replied Mar 24, 2013 to Dave's New Drift Pram-She's Done!

23 Mar 13, 2014
Reply by Brant Jaouen

"Josh, I never did pursue any further the use of Durabak for the exterior.  I decided…"

Guy Fredrickson replied Mar 24, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Phil, Thanks.  I just may resort to that when I start to varnish and paint the boat.…"

Guy Fredrickson replied Mar 24, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Phil. Thanks Josh. Winter is stubborn and it remains cold in Idaho Falls.  I…"

Guy Fredrickson replied Mar 23, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Phil, You are correct.  I am going to use textured Durabak for the top surfaces. Guy"

Guy Fredrickson replied Mar 22, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"The deck plates now have two coats of primer all around and one coat of paint on the…"

Guy Fredrickson replied Mar 22, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service