JC Smith's Discussions (47)

Discussions Replied To (36) Replies Latest Activity

""Soft maple..." ? You are a North country - Adirondack guy for sure!  :)"

JC Smith replied Mar 26, 2020 to I am looking for a light wood to make oars.

42 Mar 26, 2020
Reply by JC Smith

"Don, I use a shuttle service, Bill Cross, 607.237.3078. Recommended to me by a fly s…"

JC Smith replied Dec 21, 2019 to I am looking for a light wood to make oars.

42 Mar 26, 2020
Reply by JC Smith

"Don, if my experience is correct, you are not missing much. The throat on my oars to…"

JC Smith replied Dec 21, 2019 to I am looking for a light wood to make oars.

42 Mar 26, 2020
Reply by JC Smith

"Don, my impression is that it is not common to glue or epoxy the sides to the frames…"

JC Smith replied Dec 21, 2019 to I have a Ply/Epoxy boat but am curious

20 Dec 26, 2019
Reply by Don Tyson

"Don, Okay, some one else better informed may likely step in here with a better answe…"

JC Smith replied Dec 20, 2019 to I have a Ply/Epoxy boat but am curious

20 Dec 26, 2019
Reply by Don Tyson

"The bottom of my boat, following the instruction that came with my (excellent!) Wood…"

JC Smith replied Dec 20, 2019 to I have a Ply/Epoxy boat but am curious

20 Dec 26, 2019
Reply by Don Tyson

"To answer your question, I started with two planks each planed down to 1 1/8 inch so…"

JC Smith replied Dec 20, 2019 to I am looking for a light wood to make oars.

42 Mar 26, 2020
Reply by JC Smith

"Shawn, Tulip poplar is not related to the cottonwood/aspen/poplars. Its closest rela…"

JC Smith replied Dec 20, 2019 to I am looking for a light wood to make oars.

42 Mar 26, 2020
Reply by JC Smith

""

JC Smith replied Sep 5, 2019 to I am looking for a light wood to make oars.

42 Mar 26, 2020
Reply by JC Smith

"Shawn, to get bulk I tied one turks head with light cord, then a larger one over the…"

JC Smith replied Sep 5, 2019 to I am looking for a light wood to make oars.

42 Mar 26, 2020
Reply by JC Smith

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service