Sandy Pittendrigh's Discussions (67)

Discussions Replied To (62) Replies Latest Activity

"RE> Oar handles too high on a wider boat? That's the key question on wider boats.…"

Sandy Pittendrigh replied Mar 13, 2017 to Decked boat designs

20 Apr 7, 2017
Reply by lhedrick

"Jeremy Christensen and Larry Hedrick built two decked versions of the (my) Montana R…"

Sandy Pittendrigh replied Mar 13, 2017 to Decked boat designs

20 Apr 7, 2017
Reply by lhedrick

"Another good trip is from the highway bridge over the Judith, on the road between Le…"

Sandy Pittendrigh replied Jun 8, 2016 to Missouri River White Cliffs Trip

15 Jun 8, 2016
Reply by Sandy Pittendrigh

"This boat would rely on the strength of the mechanical screw bonding, of plywood to…"

Sandy Pittendrigh replied Apr 13, 2016 to No-ribs all plywood no-fiberglass no-epoxy no-glue boat

12 Apr 13, 2016
Reply by Sandy Pittendrigh

"Meranti is what I assumed.  Cheap enough and good enough.  I started out building wi…"

Sandy Pittendrigh replied Apr 13, 2016 to No-ribs all plywood no-fiberglass no-epoxy no-glue boat

12 Apr 13, 2016
Reply by Sandy Pittendrigh

"1/4" or perhaps 3/8" for the sides.  I'm thinking 3/8" 1/2" plywood for the bottom…"

Sandy Pittendrigh replied Apr 13, 2016 to No-ribs all plywood no-fiberglass no-epoxy no-glue boat

12 Apr 13, 2016
Reply by Sandy Pittendrigh

"RE> "If for example you need to replace the bottom and remove it, the relieved te…"

Sandy Pittendrigh replied Apr 13, 2016 to No-ribs all plywood no-fiberglass no-epoxy no-glue boat

12 Apr 13, 2016
Reply by Sandy Pittendrigh

"I like it.  That large rear compartment would help keep the hull shape stable too. N…"

Sandy Pittendrigh replied Apr 12, 2016 to No-ribs all plywood no-fiberglass no-epoxy no-glue boat

12 Apr 13, 2016
Reply by Sandy Pittendrigh

"So what would be the advantages of this boat? Why build it? All the parts are easil…"

Sandy Pittendrigh replied Apr 11, 2016 to No-ribs all plywood no-fiberglass no-epoxy no-glue boat

12 Apr 13, 2016
Reply by Sandy Pittendrigh

"I use 3/4" white PVC water pipe. Has an inside diameter of a tad less than 5/8" inch…"

Sandy Pittendrigh replied May 10, 2014 to oarlock bushings

16 May 10, 2014
Reply by Randy Dersham

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service