Replies to This Discussion

Permalink Reply by Ben Kittell on September 6, 2014 at 2:32pm

I have a trailer for sale, but it is in Bend, OR. May be on your way between SoCal and ID though.

• ▶ Reply

Permalink Reply by Phillip Westendorf on September 6, 2014 at 6:22pm

Gregg,

Dennis Liden (custom welder/fabricator) in Gig Harbor. WA  can quote you a trailer or sell you the major components if you have the ability to fabricate it locally.  The shipping via common carrier isn't too bad. His phone number is 253-884-4910 and e-mail address is   dliden@centurytel.net

It won't cost anything to get a quotation.

phil w

• ▶ Reply

Permalink Reply by Gregg Maddock on September 10, 2014 at 11:52am

Ben  thanks for your offer.  I'll be on a tight schedule when I am in Idaho in Oct. and bend would be a little out of the way right now.  Plus the boat has not even been started yet.  Phillip, I may call Dennis if I can find a fabricator.  My drive up and back will take me directly through Idaho Falls.  I'm going to contact Hyde and Clacka and see if they have any used trailers.  Thanks for help, it is much appreciated.

 

Gregg

• ▶ Reply

Permalink Reply by Tom Anderson on September 10, 2014 at 5:40pm

Hey Gregg . . .

If you're going to go through Portland area and check with Clackacraft, you should check out Baker Trailers who make many of the trailers for the boat companies (or at least used to I understand).  Here's a link to their website . . . they're in Junction City, OR.

Baker Trailers

• ▶ Reply

Permalink Reply by David Jensen on September 12, 2014 at 9:28am

If you are going to go new, I think Stan Steele in Lebanon, OR is the best.

• ▶ Reply