Plascore alternatives

I am working out a materials list before building a stitch and glue boat. Is there any information comparing the various honeycomb panel products... Plascore, Nidacore, Carboncore, or any others? Thanks

Views: 262

▶ Reply to This

Replies to This Discussion

Permalink Reply by David Witton on February 12, 2018 at 7:14am

I settled on Nidacore - since it can be folded, it's much cheaper to ship. 

Permalink Reply by JC Smith on February 12, 2018 at 7:27am

Folding implies the skin on one side is cut or otherwise interrupted. Is this correct? Does a folded product have limitations in how you use it?

Permalink Reply by David Witton on February 12, 2018 at 3:26pm

Correct, the skin on one side is cut. This allows the product to be used to create curved surfaces. Since the strength of the skin is provided by the glass & epoxy laminated to it, I don't believe there's a drawback. 

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service