Lawrence E. Long's Discussions (324)

Search Forum

View

Discussions Replied To (320) Replies Latest Activity

"It is an addative to mix with the linseed oil/turps to accelerate the curing / dryin…"

Lawrence E. Long replied Mar 14, 2013 to Varnish and Oil

 9 Mar 14, 2013
Reply by Lawrence E. Long

"Josh:  If you are really going to do a lot of varnish I suggest you purchase  BRIGH…"

Lawrence E. Long replied Mar 13, 2013 to Varnish and Oil

 9 Mar 14, 2013
Reply by Lawrence E. Long

"Don't forget the Japan Drier."

Lawrence E. Long replied Mar 13, 2013 to Varnish and Oil

 9 Mar 14, 2013
Reply by Lawrence E. Long

"Josh:  I hope you are not married- if you are- expect divorce papers  soon after the…"

Lawrence E. Long replied Mar 12, 2013 to Varnish and Oil

 9 Mar 14, 2013
Reply by Lawrence E. Long

"Ben: We have 2 boats that stay on moorings(salt water) from late May to early Octobe…"

Lawrence E. Long replied Feb 25, 2013 to Interior brightwork vs paint

 11 Feb 25, 2013
Reply by Lawrence E. Long

"Around here on the coast of ME when you see a boat with lots of varnish it is either…"

Lawrence E. Long replied Feb 14, 2013 to Interior brightwork vs paint

 11 Feb 25, 2013
Reply by Lawrence E. Long

"Randy is right.  Paint is the way to go- unless you love to varnish(who does?)  The…"

Lawrence E. Long replied Feb 11, 2013 to Interior brightwork vs paint

 11 Feb 25, 2013
Reply by Lawrence E. Long

"Ben:  I ran across this someplace.  Furniture makers work to the nearest 1/64 ", car…"

Lawrence E. Long replied Feb 5, 2013 to How big is too BIG?

 4 Feb 6, 2013
Reply by Ben Kittell

"Brian: Try a heat gun and a DULL putty knife.  Will remove almost all of it and not…"

Lawrence E. Long replied Jan 28, 2013 to Epoxy over varnish.

 9 Feb 10, 2013
Reply by Don Hanson

"John: I built the boat in 2003 and since then has been on the Big Horn, Yellowstone,…"

Lawrence E. Long replied Jan 20, 2013 to Hardware sources?

 8 Jan 21, 2013
Reply by John Bateman

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service