Bennett Yarbrough's Discussions (367)

Search Forum

View

Discussions Replied To (350) Replies Latest Activity

"Mike I'll get you picture once I clean all the dried glue and graphite dust off the…"

Bennett Yarbrough replied Oct 5, 2017 to Baker 17x54 build

 298 Feb 10
Reply by Bennett Yarbrough

"Thanks y'all. Gregg I hope you like it! I copied your boat haha."

Bennett Yarbrough replied Oct 5, 2017 to Baker 17x54 build

 298 Feb 10
Reply by Bennett Yarbrough

"haven't updated this in a while. Put the bow eye on.  I drilled two holes in a 2x4 a…"

Bennett Yarbrough replied Oct 4, 2017 to Baker 17x54 build

 298 Feb 10
Reply by Bennett Yarbrough

"It's how all the cool kids are building bigger 18ft+ mahogany runabouts and wood cen…"

Bennett Yarbrough replied Sep 26, 2017 to Thinking jet sled

 6 Sep 27, 2017
Reply by Robert Puckett

"I just went back through here as I'm working on the floor design and realized I was…"

Bennett Yarbrough replied Sep 13, 2017 to Baker 17x54 build

 298 Feb 10
Reply by Bennett Yarbrough

"All good Phil. I tapped the bow eye about 3/4 inches down. Then filled the hole with…"

Bennett Yarbrough replied Sep 12, 2017 to Baker 17x54 build

 298 Feb 10
Reply by Bennett Yarbrough

"Phil I was talking about jb welding the all thread into the aluminum bow eye.  I alr…"

Bennett Yarbrough replied Sep 11, 2017 to Baker 17x54 build

 298 Feb 10
Reply by Bennett Yarbrough

"So I'm getting ready to put my bow eye on and have a question. I got an aluminum one…"

Bennett Yarbrough replied Sep 8, 2017 to Baker 17x54 build

 298 Feb 10
Reply by Bennett Yarbrough

"Thanks for the replies yall. Probably good for a beginner like me to hear the good t…"

Bennett Yarbrough replied Sep 5, 2017 to Totalboat

 7 Oct 8, 2017
Reply by Steve Sobba

"Thanks kurt, On the deep burns i've been using 50 grit. Then touch up with the 150 w…"

Bennett Yarbrough replied Sep 5, 2017 to Baker 17x54 build

 298 Feb 10
Reply by Bennett Yarbrough

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service