chris towles's Discussions (219)

Search Forum

View

Discussions Replied To (202) Replies Latest Activity

"most anything will work. your completed boat will be half that limit. almost any tra…"

chris towles replied Apr 8, 2011 to Trailers

 13 Apr 13, 2011
Reply by justin nicola

"ben,    a little sanding of the glass on high spots before new coats can level some…"

chris towles replied Apr 8, 2011 to Tough time fiberglassing

 10 Apr 8, 2011
Reply by chris towles

"you should be able to sand and fair any rough spots smooth where the two pieces meet…"

chris towles replied Apr 8, 2011 to Tough time fiberglassing

 10 Apr 8, 2011
Reply by chris towles

"just screw them together, same for the gunnels. nothing and i mean nothing will stic…"

chris towles replied Apr 5, 2011 to Oar Lock Blocks

 12 Apr 6, 2011
Reply by Ben Kittell

"heres some pics of my locks. you can see that that there are 2 blocks per side. 2 ho…"

chris towles replied Apr 5, 2011 to Oar Lock Blocks

 12 Apr 6, 2011
Reply by Ben Kittell

"Hey, me again. I used uhwm. It's extremely  quiet, very slick and will never crack.…"

chris towles replied Apr 5, 2011 to Oar Lock Blocks

 12 Apr 6, 2011
Reply by Ben Kittell

"i second going the glass route. 6 oz glass will offer better protection, but the 4 o…"

chris towles replied Apr 2, 2011 to 6 oz vs 4 oz fiberglass cloth

 4 Apr 2, 2011
Reply by Stephen Blalock

"Start small and then work up from there . You can always do the seams over with a f…"

chris towles replied Apr 1, 2011 to To replace or not to replace?

 21 Apr 2, 2011
Reply by Ben Kittell

"Well getting 18'  lengths of fir still should be no prob. I also wasent lying anout…"

chris towles replied Apr 1, 2011 to To replace or not to replace?

 21 Apr 2, 2011
Reply by Ben Kittell

"as i said i had good luck with a 2x10 of select framing fir. go to the lumber yard a…"

chris towles replied Mar 31, 2011 to To replace or not to replace?

 21 Apr 2, 2011
Reply by Ben Kittell

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service