Guy Fredrickson's Discussions (812)

Discussions Replied To (810) Replies Latest Activity

"Hi Rick. The hull is one layer of 1/4-inch thick plywood and then 1/2-inch thick pla…"

Guy Fredrickson replied Mar 7, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. I lightly sanded the flat contour that accepts the chine plank to remov…"

Guy Fredrickson replied Mar 7, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. These are the backer-blocks for the bottom planks that need them. Of co…"

Guy Fredrickson replied Mar 7, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Looks like terrific workmanship. "

Guy Fredrickson replied Mar 5, 2021 to Rear casting brace solution

4 Mar 11, 2021
Reply by JC Smith

"Chris Craft. I wonder if I’m close to the halfway point on this restoration. I’m not…"

Guy Fredrickson replied Mar 4, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. Engine status. I received the transmission this week back from being se…"

Guy Fredrickson replied Mar 4, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. All the plywood panels are fastened. Next I’ll finish the battens. Then…"

Guy Fredrickson replied Mar 2, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. Attaching the battens is a little challenging. I pre-drill a rectangula…"

Guy Fredrickson replied Feb 28, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. More bottom panels on. It’s difficult to judge just how much 3M 5200 to…"

Guy Fredrickson replied Feb 27, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Rick!"

Guy Fredrickson replied Feb 27, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service