Guy Fredrickson's Discussions (812)

Search Forum

View

Discussions Replied To (810) Replies Latest Activity

"Chris Craft. First bottom panel on! This is a very critical stage. They were all pre…"

Guy Fredrickson replied Feb 26, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"The temperature inside my garage hovers around 50F. At these temperatures it takes a…"

Guy Fredrickson replied Feb 25, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Bilge paint on the bottom battens. "

Guy Fredrickson replied Feb 23, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Hi Shawn. That’s mahogany I bought for making the battens. I still have battens to m…"

Guy Fredrickson replied Feb 22, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. Seal coating the battens that go on the inside bottom between the frame…"

Guy Fredrickson replied Feb 22, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. Transom panels are on. Not clamped overly tight. Just enough to hold in…"

Guy Fredrickson replied Feb 21, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chine panels are on. "

Guy Fredrickson replied Feb 20, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Rick. I hope it still floats. : )"

Guy Fredrickson replied Feb 20, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. I’m installing the plywood panels between the chines. Bedding them in 3…"

Guy Fredrickson replied Feb 20, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. The frames are ready for the plywood! The frames as shown have 163 piec…"

Guy Fredrickson replied Feb 19, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service