Guy Fredrickson's Discussions (812)

Search Forum

View

Discussions Replied To (810) Replies Latest Activity

"Chris Craft. This is as far as I go. There is nothing left to take apart that hasn’t…"

Guy Fredrickson replied Dec 30, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Plankless... "

Guy Fredrickson replied Dec 27, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. Removing the last three planks. So many wood screws. That’s a 2.5 gallo…"

Guy Fredrickson replied Dec 27, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. I checked the fit of the starboard bottom planks. "

Guy Fredrickson replied Dec 25, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. Battens are shaped. Decisions time. I’m not sure how to best proceed. I…"

Guy Fredrickson replied Dec 24, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. Shaping the battens to the curvature of the bottom plywood. There are 1…"

Guy Fredrickson replied Dec 23, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Cutting and shaping the battens that attach to the inside surface of the plywood bet…"

Guy Fredrickson replied Dec 22, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. I installed the frames that support the propeller shaft strut. Then I s…"

Guy Fredrickson replied Dec 22, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. I finally got the pistons out of the 1959 Chris Craft 283 engine. Two c…"

Guy Fredrickson replied Dec 22, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"It’s coming together. I clamped the forward most panel to start taking some of the s…"

Guy Fredrickson replied Dec 12, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service