Guy Fredrickson's Discussions (812)

Search Forum

View

Discussions Replied To (810) Replies Latest Activity

"Applied fiberglass to the inside surfaces of the transom planks. "

Guy Fredrickson replied Nov 21, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I apply the epoxy sealer with a cheap brush. These red cups dissolved in a few minut…"

Guy Fredrickson replied Nov 19, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. These are the four planks that make up the transom. The bottom most pla…"

Guy Fredrickson replied Nov 19, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Trimming the excess fiberglass with a box-cutter blade. It’s much easier to do after…"

Guy Fredrickson replied Nov 16, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. I started on the port side planks.  Like I’ve said before, when I start…"

Guy Fredrickson replied Nov 15, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I’m still working on the starboard planks. "

Guy Fredrickson replied Nov 13, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Now, with the inside surface fiberglassed, I’m filling in the screw holes (those bel…"

Guy Fredrickson replied Nov 9, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"A few of the bottom planks cupped over the years. Probably the result of swelling wh…"

Guy Fredrickson replied Nov 8, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"My understanding is that before you lay down fiberglass, you want the substrate both…"

Guy Fredrickson replied Nov 8, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris Craft. This is the epoxy mixing station. The plungers work very well. This is…"

Guy Fredrickson replied Nov 8, 2020 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service