Randy Dersham's Discussions (571)

Discussions Replied To (537) Replies Latest Activity

"No Offense Shawn. I paint boats all the time. Our shop boats are red because Debbie…"

Randy Dersham replied Feb 9, 2010 to Toplac Paint Questions?

6 Feb 9, 2010
Reply by Randy Dersham

"Thoughts on the encapsulated boat. A boat properly encapsulated with epoxy and a go…"

Randy Dersham replied Feb 6, 2010 to Rapid Robert Floor Issue

37 Feb 16, 2010
Reply by M Quinlan

"Good feed back Dave. A couple of comments about boat bottoms. I am using the fiberg…"

Randy Dersham replied Feb 6, 2010 to Rapid Robert Floor Issue

37 Feb 16, 2010
Reply by M Quinlan

"Yup, A.J. and Ray have it right. Ray has time tested his method and I believe the st…"

Randy Dersham replied Feb 3, 2010 to chine rail rub strip

2 Feb 3, 2010
Reply by Randy Dersham

"Trim your boat so it has neutral balance in the water. Level front to back and side…"

Randy Dersham replied Feb 3, 2010 to skinny water

2 Feb 3, 2010
Reply by Robb Grubb

"Jason, I think the best compromise is to use a 20lb anchor. It is much easier to use…"

Randy Dersham replied Jan 30, 2010 to Anchor Pulley Question

7 Jan 30, 2010
Reply by Kenny Kent

"1/2 marine grade fir. I suggest you glass the bottom with 20oz triaxail fiberglass c…"

Randy Dersham replied Jan 30, 2010 to Need to put a new bottom on my Boat

5 Jan 30, 2010
Reply by Charles Ray Heater

"Forgot to say why you don't need a template. Once the boat is ready for a new bottom…"

Randy Dersham replied Jan 29, 2010 to Need to put a new bottom on my Boat

5 Jan 30, 2010
Reply by Charles Ray Heater

"No need for a template Wayne. Here's how you do it. Turn the boat upside down. Rem…"

Randy Dersham replied Jan 29, 2010 to Need to put a new bottom on my Boat

5 Jan 30, 2010
Reply by Charles Ray Heater

"It will be great to see you Jason."

Randy Dersham replied Jan 26, 2010 to New Poster for 2010 McKenzie River Wooden Boat Festival

6 Jan 28, 2010
Reply by Jena Lemke

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service