Guy Fredrickson's Discussions (812)

Discussions Replied To (810) Replies Latest Activity

"Taped again and ready for the epoxy paint.  I hope to paint tomorrow. "

Guy Fredrickson replied May 16, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris, You were absolutely correct about the blue tape; it did bleed some.  Your ide…"

Guy Fredrickson replied May 16, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Very cool Dave!"

Guy Fredrickson replied May 16, 2013 to Closing the Loop

5 May 17, 2013
Reply by Roger Fletcher

"First coat (previous picture) of primer was applied with a brush and the second coat…"

Guy Fredrickson replied May 13, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"First coat of primer!  The final coats of epoxy paint will also be white. "

Guy Fredrickson replied May 13, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris, Thanks for the advice.  That sounds like a good technique for taping.  I tape…"

Guy Fredrickson replied May 13, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Sanded, washed, and taped.  The outside of the boat is ready for primer.  My plan is…"

Guy Fredrickson replied May 12, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"The inside-sides have six coats of varnish and the chine caps have four.  The floor…"

Guy Fredrickson replied May 11, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Tungsten and thanks Phil. I went with the (oval) 3/16-in. by 3/4-in. solid-b…"

Guy Fredrickson replied May 6, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Chris, The chine caps are already coated with epoxy.  So it's too late to oil them.…"

Guy Fredrickson replied May 5, 2013 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service