Guy Fredrickson's Discussions (812)

Discussions Replied To (810) Replies Latest Activity

"Thanks Mike."

Guy Fredrickson replied Jul 20, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Lee."

Guy Fredrickson replied Jul 20, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thank you Phil."

Guy Fredrickson replied Jul 20, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"One more to go.  Then I will work on the supports for the deck plates and seat bases…"

Guy Fredrickson replied Jul 20, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Rick.  I'll check out Kiwigrip. "

Guy Fredrickson replied Jul 18, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Hi Tungsten.  I'm installing four pieces of deck plate.  I'll make them loose enough…"

Guy Fredrickson replied Jul 17, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Mike, I am thinking of using either grey outdoor carpet or grey paint with non-slip…"

Guy Fredrickson replied Jul 17, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Here are some pictures of one of the deck plates.  There will be four plates.  Three…"

Guy Fredrickson replied Jul 17, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Rick, This deck will be easily removable.  Probably just one pin on each side of eac…"

Guy Fredrickson replied Jul 15, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"I am going to deck the bottom of the boat with 1/2-in. (12-mm) plywood.  I want the…"

Guy Fredrickson replied Jul 15, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service