Guy Fredrickson's Discussions (812)

Search Forum

View

Discussions Replied To (810) Replies Latest Activity

"Tonight I cut the transom to size and laid fiberglass on the inside surface with the…"

Guy Fredrickson replied May 11, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thank you Phil."

Guy Fredrickson replied May 10, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"For the transom, I cut (slightly oversized by about 1 in. to accommodate the bevels)…"

Guy Fredrickson replied May 10, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"All of the frames are attached to the side panels and the boat is resting on the flo…"

Guy Fredrickson replied May 9, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Tungsten, I did not keep track of how much epoxy I used on the second panel.  Both p…"

Guy Fredrickson replied May 9, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I took a few days off from work and from boat building because my niece and nephew s…"

Guy Fredrickson replied May 7, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Right now the boat is supported only at the front and the back.  Only the battens ar…"

Guy Fredrickson replied May 2, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thank you Rick, that's kind of you to say so. Thank you Greg, I'm kind of re-stoked…"

Guy Fredrickson replied May 2, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"All the frames are in place!!!  Now I have to go one-by-one and anchor them into fin…"

Guy Fredrickson replied May 1, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Today is a good day.  It's starting to look like a boat.  So far, the frames are sli…"

Guy Fredrickson replied May 1, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service