Guy Fredrickson's Discussions (812)

Search Forum

View

Discussions Replied To (810) Replies Latest Activity

"Nick, I bought Port Orford Cedar from these guys... http://www.bearcreeklumber.com/…"

Guy Fredrickson replied Mar 23, 2012 to Wood.....again

 6 Mar 28, 2012
Reply by Andrew

"Dave, I will use only epoxy (with microfibers) to join the scarf joints.  There are…"

Guy Fredrickson replied Mar 23, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"My grandfather taught me a trick with nails to help prevent the wood from splitting.…"

Guy Fredrickson replied Mar 23, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Greg and Mike, I used a sanding block and 50-grit.  Like you guys suggested, it help…"

Guy Fredrickson replied Mar 23, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I was not satisfied with the results of the first scarf cut in the plywood, so I put…"

Guy Fredrickson replied Mar 23, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Here are some pictures of the scarf jig setup with two 3-ft-wide sheets of 1/4-in. (…"

Guy Fredrickson replied Mar 23, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Greg, I would like to stop by some time today or this weekend to see your progress. …"

Guy Fredrickson replied Mar 23, 2012 to EPOXY vs POLY RESIN TEST RESULTS

 6 Mar 23, 2012
Reply by Greg Jensen

"Phil, There is a 3/4-in.-wide aluminum strip, on the bottom of the board, that runs…"

Guy Fredrickson replied Mar 22, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"It makes a huge mess.  But I had hearing protection on and I just took my time.  …"

Guy Fredrickson replied Mar 21, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I used my scarf jig for the first time tonight to bevel some 3/4 in. by 3-1/2 in. ce…"

Guy Fredrickson replied Mar 21, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service