Lawrence E. Long's Discussions (324)

Search Forum

View

Discussions Replied To (320) Replies Latest Activity

"Rojo:  After it soaks in for a while you MUST  wipe the whole thing down with rags s…"

Lawrence E. Long replied Feb 16, 2014 to Boat interior finish?

 13 Mar 1, 2014
Reply by craig r stevens

"John:  Jason is right on the mark.  The following mix has worked for me. 1 Quart Tur…"

Lawrence E. Long replied Feb 15, 2014 to Boat interior finish?

 13 Mar 1, 2014
Reply by craig r stevens

"Dave:  There are no silly questions but you might get some silly comments.    When y…"

Lawrence E. Long replied Feb 9, 2014 to Laminated chine logs?

 4 Feb 11, 2014
Reply by Randy Dersham

"Mike is right on the PVC- support it full length with a 2x4 or it will "sag" like a…"

Lawrence E. Long replied Jan 20, 2014 to Wood for Gunwales

 21 Jan 28, 2014
Reply by Austin Waggoner

"Mark is correct on the runout.  Anything less than 18" and you are pushing your luck…"

Lawrence E. Long replied Jan 19, 2014 to Wood for Gunwales

 21 Jan 28, 2014
Reply by Austin Waggoner

"Austin:  Rick  is right on the mark.    Don't let the lumberyard sell you red oak. …"

Lawrence E. Long replied Jan 18, 2014 to Wood for Gunwales

 21 Jan 28, 2014
Reply by Austin Waggoner

"Mike:  Back in ME for the winter-no snow yet."

Lawrence E. Long replied Dec 3, 2013 to making oars

 13 Dec 10, 2013
Reply by Mike Balch

"Mike:  The boys have given you a lot of good advice.  There is a book by R.D. Culler…"

Lawrence E. Long replied Nov 28, 2013 to making oars

 13 Dec 10, 2013
Reply by Mike Balch

"Austin:  Newman and Anderson are right on the mark-make a jig and you can get perfec…"

Lawrence E. Long replied Nov 26, 2013 to Scarfing gunwales

 14 Nov 29, 2013
Reply by Richard Elder

"Steve:  Great job on the restoration.  It may be a 20 year old boat but look at the…"

Lawrence E. Long replied Nov 21, 2013 to My wooden boat gets a make over.

 28 Mar 29, 2016
Reply by marty whipple

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service