Ben Kittell's Discussions (120)

Discussions Replied To (91) Replies Latest Activity

"I know I like things to be perfect, tying flies drives me nuts cause I look so close…"

Ben Kittell replied Mar 3, 2011 to HELP! with bad scarfs

5 Mar 5, 2011
Reply by Dave Z

"I am screwing in the supports that you mentioned to the side wall. I know that I wil…"

Ben Kittell replied Mar 2, 2011 to Screws through Fiberglass

17 Mar 3, 2011
Reply by lhedrick

"Will stainless screws work for epoxying over if I am then leaving the interior oiled…"

Ben Kittell replied Mar 2, 2011 to Screws through Fiberglass

17 Mar 3, 2011
Reply by lhedrick

"I was planning on using the screws to attach the deck supports then use 1500 to seal…"

Ben Kittell replied Mar 1, 2011 to Screws through Fiberglass

17 Mar 3, 2011
Reply by lhedrick

"So its looking like fiberglassing after. Is there an issue with epoxy running down t…"

Ben Kittell replied Mar 1, 2011 to Screws through Fiberglass

17 Mar 3, 2011
Reply by lhedrick

"So im building a framed boat, and for the purpose of the disscussion lets say is a d…"

Ben Kittell replied Mar 1, 2011 to Screws through Fiberglass

17 Mar 3, 2011
Reply by lhedrick

"So the rail is actualy sidways? Can you do 2 at a time using both sides of the jig? …"

Ben Kittell replied Feb 26, 2011 to Epoxy

7 Feb 26, 2011
Reply by Ben Kittell

"Yup, one coat of normal epoxy, then one coat of thickened with silicon."

Ben Kittell replied Feb 26, 2011 to Epoxy

7 Feb 26, 2011
Reply by Ben Kittell

"Kevin, that jig makes just helped me out so much. Mine was close but I just had a fe…"

Ben Kittell replied Feb 15, 2011 to Scarfing chine logs, rails, etc.

11 Feb 18, 2011
Reply by Eric Loudenslager

"Is that piece screwed to the fence part of the board you are cutting? If it is inst…"

Ben Kittell replied Feb 15, 2011 to Scarfing chine logs, rails, etc.

11 Feb 18, 2011
Reply by Eric Loudenslager

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service