Guy Fredrickson's Discussions (794)

Discussions Replied To (792) Replies Latest Activity

"Chris Craft: Aligning the propeller shaft strut and bearing. In this picture the str…"

Guy Fredrickson replied on Saturday to Guy's Wooden Drift Boat Project

1019 on Saturday
Reply by Guy Fredrickson

"Chris Craft: I changed my mind. Others convinced me to forego the fiberglassed botto…"

Guy Fredrickson replied on Tuesday to Guy's Wooden Drift Boat Project

1019 on Saturday
Reply by Guy Fredrickson

"The purpose of fairing the bottom isn’t for aesthetics, it’s so the fiberglass will…"

Guy Fredrickson replied Nov 18 to Guy's Wooden Drift Boat Project

1019 on Saturday
Reply by Guy Fredrickson

"Chris Craft: Since my last post I filled all the new wood screw holes with Smith’s F…"

Guy Fredrickson replied Nov 18 to Guy's Wooden Drift Boat Project

1019 on Saturday
Reply by Guy Fredrickson

"Chris Craft. Bottom planks (below the waterline) are bed in 3M 5200. Just about fini…"

Guy Fredrickson replied Oct 13 to Guy's Wooden Drift Boat Project

1019 on Saturday
Reply by Guy Fredrickson

"Chris Craft: I’m bedding the bottom planks (everything below the waterline) in 3M 52…"

Guy Fredrickson replied Sep 11 to Guy's Wooden Drift Boat Project

1019 on Saturday
Reply by Guy Fredrickson

"I hope this site isn’t crashing. The homepage has some issues. "

Guy Fredrickson replied Aug 26 to Guy's Wooden Drift Boat Project

1019 on Saturday
Reply by Guy Fredrickson

"The horns and mast are repaired.  "

Guy Fredrickson replied Aug 26 to Guy's Wooden Drift Boat Project

1019 on Saturday
Reply by Guy Fredrickson

"Very nice! Congratulations!"

Guy Fredrickson replied Aug 12 to First build

248 Aug 14
Reply by Rick Newman

"Martinac. Rebuilding the 12-V horns. Made by Autolite. They were in rough condition,…"

Guy Fredrickson replied Jul 31 to Guy's Wooden Drift Boat Project

1019 on Saturday
Reply by Guy Fredrickson

RSS

© 2022   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service