Guy Fredrickson's Discussions (812)

Discussions Replied To (810) Replies Latest Activity

"Hi Rick. This seal is virtually maintenance free. However, you have to supply water…"

Guy Fredrickson replied Mar 29, 2020 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"I fitted a new shaft seal to the hull. This is new technology. The seal is between g…"

Guy Fredrickson replied Mar 29, 2020 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"One of the frames had two cracks; one on each side symmetrical to the center. I made…"

Guy Fredrickson replied Mar 21, 2020 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"About 800 toothpicks and some epoxy filler.  "

Guy Fredrickson replied Mar 17, 2020 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"I’ve been focusing my efforts on cleaning the inside of the hull in preparation for…"

Guy Fredrickson replied Mar 14, 2020 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Thanks Rick and Mike! I seal coated and painted the undersides of the foredeck and a…"

Guy Fredrickson replied Mar 7, 2020 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"The new 200 HP Chevrolet 350 marine engine arrived. This boat ain’t meant to be a dr…"

Guy Fredrickson replied Feb 23, 2020 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

""

Guy Fredrickson replied Feb 18, 2020 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"So far I’ve used it on some of the internal frames that are hidden when the boat is…"

Guy Fredrickson replied Feb 18, 2020 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"I want to put in a recommendation plug for this product; Smith’s Clear Penetrating E…"

Guy Fredrickson replied Feb 18, 2020 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service