Guy Fredrickson's Discussions (812)

Search Forum

View

Discussions Replied To (810) Replies Latest Activity

"Good point.  FYI. This summer I used West epoxy (105 and 206)  in temperatures in th…"

Guy Fredrickson replied Nov 9, 2021 to Epoxy and Varnish Project

 25 Mar 21, 2022
Reply by Shawn Baker

"Hi Rick. Thanks. I’ll need some luck with this engine. How are you these days?"

Guy Fredrickson replied Nov 7, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Martinac. I’m curtailing work on the Martinac’s hull until next spring. I cleaned an…"

Guy Fredrickson replied Nov 6, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"For removing the old finish, I’ve had a lot of success with a heat gun and scraper.…"

Guy Fredrickson replied Nov 1, 2021 to Epoxy and Varnish Project

 25 Mar 21, 2022
Reply by Shawn Baker

"Hi Derrick, I think you are on the right track. Sand off the old finish. Apply a pen…"

Guy Fredrickson replied Oct 30, 2021 to Epoxy and Varnish Project

 25 Mar 21, 2022
Reply by Shawn Baker

"Martinac. Finally finished installing the interior panels in the bow. Here are some…"

Guy Fredrickson replied Oct 30, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Martinac. I’ve been waiting for some fasteners to arrive to complete the bow repairs…"

Guy Fredrickson replied Oct 24, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"I’ve never seen a boat like that. It’s interesting. Should clean up nicely. Does it…"

Guy Fredrickson replied Oct 10, 2021 to AuSable Long Boat Refinishing

 8 Oct 13, 2021
Reply by Jason Knight

"Hi Jason. Technically… epoxy may not bond well to polyester resin. But you are just…"

Guy Fredrickson replied Oct 10, 2021 to AuSable Long Boat Refinishing

 8 Oct 13, 2021
Reply by Jason Knight

"Martinac. One set of inside panels installed in the bow. Three more sets to go. I be…"

Guy Fredrickson replied Oct 6, 2021 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service