Greg Jensen's Discussions (59)

Search Forum

View

Discussions Replied To (47) Replies Latest Activity

"Dave - with the scarph when you are done there are no screws involved. When the join…"

Greg Jensen replied Mar 23, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Guy - Ditto Mike's reply, just touch up with your belt sander. I tried to use a hand…"

Greg Jensen replied Mar 23, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Guy - I will be doing my final cut and installing my bottom Saturday. Then sanding a…"

Greg Jensen replied Mar 23, 2012 to EPOXY vs POLY RESIN TEST RESULTS

 6 Mar 23, 2012
Reply by Greg Jensen

"I was finally able to speak with a really good tech rep from the resin comany, and h…"

Greg Jensen replied Mar 23, 2012 to EPOXY vs POLY RESIN TEST RESULTS

 6 Mar 23, 2012
Reply by Greg Jensen

"Hi Dave - As an update - I used used dowells on the butt joints, epoxied them in wit…"

Greg Jensen replied Mar 23, 2012 to 56" Wide Bottom troubles... A lesson is what NOT to do.

 2 Mar 23, 2012
Reply by Greg Jensen

"Andrew - thanks for the link. That FLYGUY688 is a really bright fellow, incredible t…"

Greg Jensen replied Mar 20, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"The Polyester Resin is BAD!!!!!!!! If I hadn't only had to pay for shipping for my r…"

Greg Jensen replied Mar 14, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Guy - 10:1 should be fine. A lot of people use 8:1 and have great results. I just us…"

Greg Jensen replied Mar 12, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"And the scarph's are easy, I let them freak me out for a while, but really, they are…"

Greg Jensen replied Mar 12, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

"Guy - Are you using 1/4 for the bottom?? Greg"

Greg Jensen replied Mar 12, 2012 to Guy's Wooden Drift Boat Project

 1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service