JC Smith's Discussions (32)

Discussions Replied To (25) Replies Latest Activity

"Don, I use a shuttle service, Bill Cross, 607.237.3078. Recommended to me by a fly s…"

JC Smith replied Dec 21, 2019 to I am looking for a light wood to make oars.

39 Dec 22, 2019
Reply by Don Tyson

"Don, if my experience is correct, you are not missing much. The throat on my oars to…"

JC Smith replied Dec 21, 2019 to I am looking for a light wood to make oars.

39 Dec 22, 2019
Reply by Don Tyson

"Don, my impression is that it is not common to glue or epoxy the sides to the frames…"

JC Smith replied Dec 21, 2019 to I have a Ply/Epoxy boat but am curious

20 Dec 26, 2019
Reply by Don Tyson

"Don, Okay, some one else better informed may likely step in here with a better answe…"

JC Smith replied Dec 20, 2019 to I have a Ply/Epoxy boat but am curious

20 Dec 26, 2019
Reply by Don Tyson

"The bottom of my boat, following the instruction that came with my (excellent!) Wood…"

JC Smith replied Dec 20, 2019 to I have a Ply/Epoxy boat but am curious

20 Dec 26, 2019
Reply by Don Tyson

"To answer your question, I started with two planks each planed down to 1 1/8 inch so…"

JC Smith replied Dec 20, 2019 to I am looking for a light wood to make oars.

39 Dec 22, 2019
Reply by Don Tyson

"Shawn, Tulip poplar is not related to the cottonwood/aspen/poplars. Its closest rela…"

JC Smith replied Dec 20, 2019 to I am looking for a light wood to make oars.

39 Dec 22, 2019
Reply by Don Tyson

""

JC Smith replied Sep 5, 2019 to I am looking for a light wood to make oars.

39 Dec 22, 2019
Reply by Don Tyson

"Shawn, to get bulk I tied one turks head with light cord, then a larger one over the…"

JC Smith replied Sep 5, 2019 to I am looking for a light wood to make oars.

39 Dec 22, 2019
Reply by Don Tyson

"My oars are 2 inches under the wraps tapering down to 1 3/4 at the transition to the…"

JC Smith replied Aug 29, 2019 to I am looking for a light wood to make oars.

39 Dec 22, 2019
Reply by Don Tyson

RSS

© 2020   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service