Anchor systems

I have an original Bo's anchor system with the extended back pulley system and would like to purchase a simple pulley for the rear (outside) like a lot of the photos. Then place a bang plate on my boat transom. I just don't seem to know how to locate one. Any advice is welcomed. Or I will have someone cut my extended arm down. Thanks.

Views: 378

▶ Reply to This

Replies to This Discussion

Permalink Reply by Rick Finnell on October 20, 2014 at 5:09pm
Permalink Reply by Chris Anderson on October 21, 2014 at 6:49pm

Thank you. I bought the system from Bo when that was the only option as I worked for the City of Albany so I just stopped by and bought the whole package for like $100 bucks- cool to know he still has some options. Thanks again.

Permalink Reply by Dan Hooper on October 22, 2014 at 7:44am

I made my own.  3" aluminum angle & pulley from hardware store.

Permalink Reply by Chris Anderson on October 22, 2014 at 7:33pm

Thanks - seems easy enough.

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service