fiberglassing sides and bottom

I am ready to glass the bottom of my boat.the plans suggest 24oz cloth for the bottom.I have also been thinking of glassing the sides but am not sure about that.I will be coating the interior with epoxy and gel coating the exterior.I am looking for any advise from those of you who have done this before.So far my biggest questions are how much epoxy I'll need and if polyester resin will also work.Thankyou in advance for any responses.-dreu

Views: 775

▶ Reply to This

Replies to This Discussion

Permalink Reply by Mike Thomas on December 23, 2015 at 6:58pm

lol, ahhhhhh, I see how you are. I`ll have one of those on my next one :) I didnt have any bubbles on the sides, so its just that thick stuff. I will admit, doing the glass was kinda fun, I thought it was gonna be tougher.

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service