How much epoxy?

I'm restoring a 17x54 framed boat. Maybe a Don Hill kit(?). I'm planning on glassing with 6 oz. Cloth on the sides and 20 oz. cloth on the bottom. I will either paint or oil the inside. What I'm trying to figure out is how much epoxy I'll need.

I'm interested in what brands people prefer and where the best sources are too. Brad Dimock's blog has me interested in Resin Research, but I'd like to hear other opinions too.

Thanks

Jim aka Rojo

Views: 1147

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by Terry E Walsh on May 4, 2013 at 4:42pm
Good point, I use this stuff to repair everything around the farm. I always have it, and would keep enough so that I did not run out! I have not used Raka but I am going to order it and see how it compares! T

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service