Moving the Rowing seat

I need some expert advise again. I am going to put my rowing seat on rails and move it forward a bit. this is scary stuff for a rookie, I could use some advise on building the new rail system and how or what to attach it to. Is there a trick to getting the rails parallel so the seat slides? Is there a pattern for the supports for the rails?

thanks,
Dan

Views: 127

▶ Reply to This

Replies to This Discussion

Permalink Reply by AJ DeRosa on July 3, 2009 at 5:47pm
Hi Dan,

The short answer to your question is yes. Pictures will help and I will find some for you or you can swing by and look at our boats. We just today finished a big boat that will be floating the Snake tomorrow and there are sliding seats front and back.
I'll take some picture of the maiden voyage and be sure to get some detail shots of the parallel rail sytem.
Permalink Reply by Dan Burr on July 6, 2009 at 6:42am
Thanks AJ, I should just come over and do some drawings and make some measurements, maybe sometime this week.
I appreciate your willingness in helping me.

Dan

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service