Got it home now;16',manufacture not yet known,needs lots of work,but not that bad if one can look around theobvious problems.I'll try to move a few pictures; here goes.Oh ya,any help on origin would be great.

Views: 1106

Attachments:

Reply to This

Replies to This Discussion

looks kind of like a high side, can't quite tell though... not bad, I would grab it.
Give us a look at the inside.  Frame joints, front deck and knee brace system, transom knees, shear rail connections to the transom and frame.  These can be recognizable signatures from certain builders.
 Thank You AJ, Ive been reading your posts.I'll try to get more pictures on in the next two days.it has rabbited frames that look like mohogany.ring nails were used almost evrywhere,kind of sounds like an ostrem so far.It has a tenth frame under where the deck goes the deck and knee brace is gone.One side has been replaced,and not well,staples were used! Any help is appreciated.

Cat makes a pretty good glue...........j/k

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service