Oars

I bought a pair of 9' oars I'm refinishing for the drift boat I'm also refinishing. Learning a lot in the process. The oars are painted red and I'm sanding them to the raw wood. They appear to be ash. The guy I bought them from claims they are made by Willie boats. wondering if I should finish them in boat oil or epoxy and varnish?

Views: 230

▶ Reply to This

Replies to This Discussion

Permalink Reply by Lawrence E. Long on October 20, 2014 at 8:36am

Mark:  Any finish will work>  I like just varnish- 6 or so coats, the first ones thinned somewhat.  Whatever you use- don't put any on the grips.  If you can, thin out the blades somewhat to get a better balance-or use counterweights inboard of the oarlocks.  Home cast lead from wheel weights are economical- and you can experiment with the weights to get the "feel" of the oar.  Some of the pros might have better advice than mine.

Good Luck

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service