Prefinishing Ribs

Hi all, thanks in advance for any assistance. My question is whether it makes sense to prefinish the boat ribs before assembly or not. I have prefinished with epoxy on the sides and exterior bottom. I intend to z-spar the ribs after assembly.

Views: 163

▶ Reply to This

Replies to This Discussion

Permalink Reply by sanderson on February 17, 2009 at 4:49pm
It's fine to pre-finish the frames, just do not put any finish on your glue joint

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service