Replies to This Discussion

Permalink Reply by Robb Grubb on February 14, 2016 at 7:22pm

Dreu,

These work pretty good, Eugene Foundry, http://www.oregonpattern.com

They are brass or bronze, 5/8 inch shaft x about 3 inches tall, with about a 2 3/4 to 3 inch ID, you can adjust them, about $30.00 set. You need to drill your own hole for a cotter key. When you call, ask for the "Franks" oarlock.

Cheers, Robb

www.RiverTraining.net

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page