Rear Casting Brace - Gunnel to Gunnel

Hi All,

Long time lurker, fist time poster. I recently picked up a 20 year old 16ft Greg Tatman wooden drift boat. Took it down the Lower Yuba with some friends last weekend and had a blast.

As we will mostly be fly fishing, I am interested in adding a curved casting brace to the rear (bow?) of the boat from gunnel to gunnel (see attached image). I am looking for advice on fabricating the formed section. Thanks in advance.

Charlie

Views: 2730

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by Mike Thomas on July 2, 2016 at 7:21pm

I ran across this boat kinda wasting away, but it has a rear brace

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service