Tatman boat - replacement components


About 10 years ago, a friend of mine and I built a 17.5" high side tatman boat.  A few years back he was involved in an accident that significantly damaged the starboard side of the boat.

The boat sat for 18 months so I bought it with the intention of rebuilding it. Before I begin to make all broken parts, I'd like to see what is available for purchase, first.

Does anyone know where I can buy the following parts (or get templates)?

vertical rib sections - all of them on the starboard side

Mahogany nose piece

full transom with trim

necessary stainless hardware

Now that the weather is getting colder, I plan to get started on this project very soon.  I would appreciate any help you can offer.

Views: 206

▶ Reply to This

Replies to This Discussion

Permalink Reply by Randy Dersham on September 23, 2011 at 11:07am

Hello Ken,

I own Tatman boats. You can give me a call at 541-285-3676

Permalink Reply by Ken Suttorp on October 3, 2011 at 9:15am

Thanks Randy.  I've been traveling the last few weeks and haven't checked in to this site.  I'll give you a call.

 

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service