Hello, my name is Randy Young and this is my first post. I have just purchased a tatman drift boat kit from a guy that has had the kit a few years. It is a 17 X 52 model (not a high side) After looking at the kit, I found that there is no passenger or rower seats with the boat and no material to build them with. I was wondering if anyone at this site might have the plans, specs or photos of the seats. I also would like to know what type of wood ect. to use. Any help would be appreciated.

Thanks,

Randy

Views: 398

Reply to This

Replies to This Discussion

I have a 17 x 52 tatman I built 1990. If you like to get the measurements and angles off my boat, you can. I live in the Mink Creek, Id. area. Let me know if this would help.

I would like to get some measurements of your boat.  When would you be available?  I am retired and could come to your area anytime that would be good for you.

 

Thanks,

 

Randy

This weekend would be fine. Cell # 1-208-406-3145, 7 am to 6 pm, M-F. I will be at work. Cell phones will not work in Mink Creek.  

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service