Replies to This Discussion

Permalink Reply by Doug Crawford on March 15, 2009 at 10:09am

Hi all i am new to the group. I am converting a homemade trailer and need parts. Where can I get a roller for the back of my trailer?
Thanks
D

• ▶ Reply

Permalink Reply by chris bissonnette on March 16, 2009 at 12:55pm

Northen tool supply online best priceing lots o choices

• ▶ Reply

Permalink Reply by Doug Crawford on March 16, 2009 at 1:28pm

Thank You
For the reply I am looking forward to participating in this group

• ▶ Reply

Permalink Reply by Georgia Drifter on April 14, 2009 at 10:53am

Here's my trout truck and boat/trailer combo:
http://www.pbase.com/stevekeeble/image/109712212

• ▶ Reply

Permalink Reply by Brad on April 19, 2009 at 7:53am

Georgia Drifter, what waters are you drifting down there? I grew up in the greater Atlanta area, and go back a couple of times a year. I have family that lives on the Chattahoochee, but on the southern end below Atlanta, so I am not sure I want to fish the water coming out of the city.

• ▶ Reply

Permalink Reply by Tom Martin on April 19, 2009 at 7:37pm

In the research we are doing on the GEM, Fulmer drove his boat and or trailer 1900 miles out to AZ every summer for 4 years in the 1950's. He let a friend drive one time, and the car was side-swiped. Totaled the Mercury, but the boat survived. This was before interstates, and they would head out on Route 66. On the return to Muncie in 1956, Fulmer came out of a dinner to find the GEM smoking. On closer look, he saw a nice round burn hole in one of the rub rails where another vehicle had backed up to the boat, and the vehicle's muffler had burned a perfect round hole in the side of the rail.

So as we build this boat, we will need a trailer. Who's got thoughts on makes and models?

Thanks for your thoughts, yours, tom

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page