Wooden Boat People
By McKenzieDriftBoat.com
Forum Discussions (2,013)
| Discussions | Replies | Latest Activity |
|---|---|---|
Lowe's and Okuome and Meranti PlywoodHey Guys, Just found out that you can order the plywood in many thickness from BLUELINX and pretty quick turn around. Don't have the dollar… Started by Jeffery Wood in General Forum |
5 |
Nov 30, 2010 Reply by Jerry Thompson |
Nails verses ScrewsI understand that ringshank nails hold as well a screws. What are the pros and cons of these fasteners for attaching the sides and bottom t… Started by Jerry Thompson in General Forum |
9 |
Nov 29, 2010 Reply by Randy Dersham |
Keelson, or not to Keelson...Okay. As I delve deeper and deeper into this world of boat building I continue to see that designs, and building/engineering practices are… Started by Jordan Davis in General Forum |
5 |
Nov 29, 2010 Reply by Jordan Davis |
Chinook Update 11/27/2010Just wanted to share some pictures with all of you. Had some extra time over the holiday and got all of the frames built. They are not se… Started by Jordan Davis in General Forum |
3 |
Nov 28, 2010 Reply by Randy Dersham |
Clear Vertical GrainWhat is vertical grain? When looking at the end of a board, is vertical grain parallel to the width of the board or perpendicular to it? … Started by Jerry Thompson in General Forum |
6 |
Nov 28, 2010 Reply by Rick Newman |
boat for saleI just finished a drift boat from scratch and am trying to sell it...any suggestions....thanx..dp Started by Daniel Paul in General Forum |
4 |
Nov 28, 2010 Reply by Daniel Paul |
Good and bad news about Linda.The bad news is that many of you received an email or comment on a post from a spammer named Linda.The good news is that this was a very sh… Started by Randy Dersham in General Forum |
3 |
Nov 28, 2010 Reply by Greg Hatten |
Bummed OutWell I was nearly done with my freestone guide and then a pain started up in by back and legs. It kept getting worse and worse. So I rolled… Started by Joseph Podesta in General Forum |
8 |
Nov 28, 2010 Reply by Joseph Podesta |
Need Information on boat I need to sellThis boat belonged to my father in law. The boat is squared off at both ends. I can't find any information on this kind of boat. Could it b… Started by Bob Hollman in General Forum |
3 |
Nov 27, 2010 Reply by Bob Hollman |
Wooden Drift SkiffGot the real strong urge to build a 15' wooden drift skiff... anyone out there built one yet? I haven't found any plans... but after insp… Started by Riverman in General Forum |
4 |
Nov 27, 2010 Reply by Riverman |
© 2025 Created by Randy Dersham.
Powered by
