Well, when I read your profile I somehow thought you lived in Vernon Utah, which is just south of Salt Lake, so a fairly easy drive from here. Thanks for the heads up that you actually live in Arizona. Sorry about that Doug. It would be a little too far at this point for me to take the boat. Thanks for your interest and reply.
Hi Doug, $2500 would be for the boat only. I am researching the cost of new trailers here and depending on what I find, I could probably go around $3000 for boat and trailer. The boat is a highside, so the sides are 3 inches taller than a standard because I used it on class III+ rivers. It does have a brand new 20 OZ biaxle weave cloth/epoxy bottom on it finished with a layer of Coat It, which is a carbon fiber epoxy that is hard and slick. The outside has a fresh coat of spar varnish and if you want the boat, I will refinish the interior as well. It does not come with oars. But I do have three handles and blades for Sawyer MXG composite oars that you are welcome to. You would just need to order 9' shafts from Sawyer. There is no anchor system. I could meet south east of Salt Lake somewhere with the boat. Thanks.....Kurt
OK, sounds good Doug about passing on the boat. I don't have any plans for a 14, sorry. Not sure if you have checked out Don Hill's site. They sell plans and instructional video for about $95. http://www.dhdriftboats.com/driftBoatPlans.html
Kurt Selisch
Good Morning,
Well, when I read your profile I somehow thought you lived in Vernon Utah, which is just south of Salt Lake, so a fairly easy drive from here. Thanks for the heads up that you actually live in Arizona. Sorry about that Doug. It would be a little too far at this point for me to take the boat. Thanks for your interest and reply.
Kurt
Aug 15, 2012
Kurt Selisch
Hi Doug, $2500 would be for the boat only. I am researching the cost of new trailers here and depending on what I find, I could probably go around $3000 for boat and trailer. The boat is a highside, so the sides are 3 inches taller than a standard because I used it on class III+ rivers. It does have a brand new 20 OZ biaxle weave cloth/epoxy bottom on it finished with a layer of Coat It, which is a carbon fiber epoxy that is hard and slick. The outside has a fresh coat of spar varnish and if you want the boat, I will refinish the interior as well. It does not come with oars. But I do have three handles and blades for Sawyer MXG composite oars that you are welcome to. You would just need to order 9' shafts from Sawyer. There is no anchor system. I could meet south east of Salt Lake somewhere with the boat. Thanks.....Kurt
Aug 16, 2012
Kurt Selisch
OK, sounds good Doug about passing on the boat. I don't have any plans for a 14, sorry. Not sure if you have checked out Don Hill's site. They sell plans and instructional video for about $95. http://www.dhdriftboats.com/driftBoatPlans.html
Aug 19, 2012