Guy Fredrickson's Discussions (812)

Discussions Replied To (810) Replies Latest Activity

"Martinac. I’m waiting on more fasteners for the bottom stringers. The stringers show…"

Guy Fredrickson replied Jul 18, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Martinac. I prepared all the bottom stringers for the port and starboard sides. I st…"

Guy Fredrickson replied Jul 16, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Martinac. The two outermost bottom stringers have a twist at the bow ends. Not much,…"

Guy Fredrickson replied Jul 13, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Martinac. I pulled some of the tape off the bottom to inspect how well the holes fil…"

Guy Fredrickson replied Jul 11, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Martinac. The port side fiberglass is epoxied. It took me about 2.5 hours once I sta…"

Guy Fredrickson replied Jul 11, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Martinac. The fiberglass is laid and ready for epoxy. Maybe early tomorrow morning.…"

Guy Fredrickson replied Jul 10, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Yeah. It’s going to be a hot summer. "

Guy Fredrickson replied Jul 10, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Hi Jayson. Those boats are all amazing. "

Guy Fredrickson replied Jul 8, 2021 to Recent builds to share

8 Jul 11, 2021
Reply by Shawn Baker

"Martinac. The port side bottom plywood is coated in epoxy and nearly all of the hole…"

Guy Fredrickson replied Jul 7, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Martinac. I sanded smooth the outside bottom hull in the areas where the holes were.…"

Guy Fredrickson replied Jul 1, 2021 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service