tungsten's Discussions (373)

Search Forum

View

Discussions Replied To (367) Replies Latest Activity

"I would put one ontop of the other,a good wash and sand between coats. A good test…"

tungsten replied Feb 6, 2015 to mixing epoxy brands

 2 Feb 6, 2015
Reply by tungsten

"Funny here in Canada triax 22 oz is twice the price of 18 ozDB.This is why I mention…"

tungsten replied Feb 5, 2015 to panel strength

 22 Feb 17, 2016
Reply by Chris

"Mike,you could probably save yourself a few bucks on the more expensive triax and ju…"

tungsten replied Feb 4, 2015 to panel strength

 22 Feb 17, 2016
Reply by Chris

"No experience with the stuff but remember to wash the surface first, just in case of…"

tungsten replied Sep 26, 2014 to Epifanes Varnish

 12 Feb 6, 2015
Reply by Mike Baker

"The rows of wheels are flat so that wont match the rocker of the boat,I'd say get ri…"

tungsten replied Sep 13, 2014 to Trailer Modification Questions

 2 Sep 13, 2014
Reply by Josh Case

"How does one go about fixing something like this?Would you be able to cut out the wh…"

tungsten replied Sep 11, 2014 to Boat Repair

 8 Sep 11, 2014
Reply by Rick Newman

"For best results start with tipping your boat so your sides are flat,do one at atime…"

tungsten replied Jun 5, 2014 to What is the secret to getting a clear finish?

 9 Jun 10, 2014
Reply by John Ahlbin

"It may help if you can get your boat to sit side ways,put something like clear tape…"

tungsten replied Apr 8, 2014 to wrong finish

 7 Apr 8, 2014
Reply by John Ahlbin

"I ve never used it but understand 3M 4200 might work as it has all the good stuff in…"

tungsten replied Feb 11, 2014 to chine wear

 4 Feb 11, 2014
Reply by Luke Cranney

"You can build a jig on a bench to match the curve,then glue and clamp it all togethe…"

tungsten replied Feb 10, 2014 to Laminated chine logs?

 4 Feb 11, 2014
Reply by Randy Dersham

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service