Dave Z's Discussions (650)

Discussions Replied To (596) Replies Latest Activity

"You'll want to leave the screw heads accessible.  Oil em.  I wouldn't put a "hard" s…"

Dave Z replied Nov 24, 2012 to finishing chine caps

14 Dec 7, 2012
Reply by Lawrence E. Long

"Jason, You take that big boat on the PM?  That has got to be tight in places right?…"

Dave Z replied Nov 6, 2012 to Midwest Drift Boat Design - First Time Builder

15 Nov 17, 2012
Reply by Robert H Buck II

"MIke, Check out http://marine-plywood.us/mahogany_meranti.htm in Vickery Ohio.  Las…"

Dave Z replied Oct 12, 2012 to Materials Cost - Double Ender

7 Oct 17, 2012
Reply by Rick Newman

"I'll second Randy- 1/2 FIR bottom instead of the 3/8.  Built that boat twice, once i…"

Dave Z replied Oct 11, 2012 to Materials Cost - Double Ender

7 Oct 17, 2012
Reply by Rick Newman

"For rails and all topside, no problem.  Use it all the time.   At water line and bel…"

Dave Z replied Oct 11, 2012 to Stainless Question

6 Oct 20, 2012
Reply by Bob bryan

"Get it seaworthy on the cheap, take it for a few trips and decide if you like the bo…"

Dave Z replied Oct 5, 2012 to Restoration or new build

17 Oct 17, 2012
Reply by Don Hanson

"im envious.  good luck hunting!"

Dave Z replied Sep 27, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"Rick,   I'm school #2.  Oiled floors.  It works in my climate.  I built varnished, e…"

Dave Z replied Sep 26, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

""I may hold off on installing drain plugs for awhile and keep a bilge pump onboard."…"

Dave Z replied Sep 26, 2012 to Guy's Wooden Drift Boat Project

1039 Nov 18, 2023
Reply by Guy Fredrickson

"That's well said and real stand-up of you Randy.  This place is awesome.  Thanks for…"

Dave Z replied Sep 17, 2012 to Bottom and Interior Coatings

3 Sep 17, 2012
Reply by Dave Z

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service