Randy Dersham's Discussions (571)

Discussions Replied To (537) Replies Latest Activity

"I always recommend one of these two techniques. 1. Oil raw wood and repeat often.  2…"

Randy Dersham replied Dec 12, 2011 to Fiberglass deck?

3 Dec 12, 2011
Reply by Randy Dersham

"That is a great story Greg.  Just for giggles here is the sister hull with Sanderso…"

Randy Dersham replied Dec 12, 2011 to Portola - "Head up my boat"

8 Dec 14, 2011
Reply by Darrell Lyons

"Coating with epoxy without glass would serve the purpose of making the area easier t…"

Randy Dersham replied Dec 11, 2011 to Fiberglass deck?

3 Dec 12, 2011
Reply by Randy Dersham

"Roger, I think you are absolutely right.  It is so obvious. This is the sixth boat o…"

Randy Dersham replied Dec 9, 2011 to Need help identifying my wooden drift boat

27 Jan 2, 2013
Reply by Tom Anderson

"Kevin, here's a little info about your HIN (Hull Identification Numbers)  Prior to N…"

Randy Dersham replied Dec 5, 2011 to Need help identifying my wooden drift boat

27 Jan 2, 2013
Reply by Tom Anderson

"Paint thinner will do it.  I prefer naptha over mineral spirits because it evaporate…"

Randy Dersham replied Dec 3, 2011 to Installing new chines

6 Dec 3, 2011
Reply by Randy Dersham

"Ray, the best luck we have had with 5200 is to take a small chip brush, one or two i…"

Randy Dersham replied Dec 2, 2011 to Installing new chines

6 Dec 3, 2011
Reply by Randy Dersham

"Southco latches.  There are many types.   http://www.southco.com/?gclid=COj695eM06wC…"

Randy Dersham replied Nov 25, 2011 to wooden hatch latch

2 Nov 26, 2011
Reply by Steve Gausman

"What you do is entirely up to you.  I would first sand the paint down a small amount…"

Randy Dersham replied Nov 20, 2011 to Beginning work on my new boat - 1994 Drifter built by Stuart Williams

22 Sep 30, 2012
Reply by Fly Guys (Riverdriver)

"Roger, this is very common fir plywood checking.  The best for you to do now is exac…"

Randy Dersham replied Nov 20, 2011 to Beginning work on my new boat - 1994 Drifter built by Stuart Williams

22 Sep 30, 2012
Reply by Fly Guys (Riverdriver)

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service