Art Page's Discussions (30)

Discussions Replied To (27) Replies Latest Activity

"So I'm kinda dragging my feet on fully assembling the hull since I'll need to do thi…"

Art Page replied Oct 28 to 17-foot McKenzie drift boat

32 20 hours ago
Reply by Art Page

"These machined pulleys and small bracket will be used as part of the anchor system.…"

Art Page replied Oct 27 to 17-foot McKenzie drift boat

32 20 hours ago
Reply by Art Page

"Thanks David.  I'm thinking about mimicking some of the details you did on your boat…"

Art Page replied Oct 26 to 17-foot McKenzie drift boat

32 20 hours ago
Reply by Art Page

"I designed an anchor arm bracket that will mount in the center of the stern.  The pl…"

Art Page replied Oct 25 to 17-foot McKenzie drift boat

32 20 hours ago
Reply by Art Page

" In the meantime, I machined up a bow eye from 1/2" aluminum.... "

Art Page replied Oct 25 to 17-foot McKenzie drift boat

32 20 hours ago
Reply by Art Page

"The dry fit up/assembly revealed no surprises...it looks like a boat!  I then disass…"

Art Page replied Oct 25 to 17-foot McKenzie drift boat

32 20 hours ago
Reply by Art Page

"So at this point I have all the major parts for the boat "carcass" minus the bottom…"

Art Page replied Oct 23 to 17-foot McKenzie drift boat

32 20 hours ago
Reply by Art Page

"For the stern, I epoxy laminated 1/2 and 1/4 ply to get a 3/4" thick sheet....…"

Art Page replied Oct 23 to 17-foot McKenzie drift boat

32 20 hours ago
Reply by Art Page

" "

Art Page replied Oct 23 to 17-foot McKenzie drift boat

32 20 hours ago
Reply by Art Page

" Prepping and epoxying the hull panels.... "

Art Page replied Oct 23 to 17-foot McKenzie drift boat

32 20 hours ago
Reply by Art Page

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service