17-foot McKenzie drift boat

I'm deep into building my McKenzie drift boat using the Don Hill 17' Flyfisher plans from driftboatplans.com. The previously documented builds here have been a tremendous help, answering many of my initial questions. I'll certainly have many more questions as I progress, and hopefully the community can continue to guide me in the right direction.

Views: 15

▶ Reply to This

Replies to This Discussion

Permalink Reply by Art Page 14 hours ago

African Mahogany for the frames...

Permalink Reply by Art Page 14 hours ago

Permalink Reply by Art Page 11 hours ago

Frames were pre-varnished with Total Boat wood sealer...

Permalink Reply by Art Page 11 hours ago

Next up was making the scarf cuts on the 1/4 ply for the hull.  I ended making a router jig on linear bearings which worked pretty well...

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service