Art Page's Discussions (29)

Search Forum

View

Discussions Replied To (26) Replies Latest Activity

"Awesome, that's exactly what I wanted to hear.  Thanks for verifying."

Art Page replied Nov 15 to Trailer Leaf Springs

 2 Nov 15
Reply by Art Page

"Hmmm, now you got me thinking I should just offset it when I first mount it....will…"

Art Page replied Nov 10 to 17-foot McKenzie drift boat

 31 Nov 10
Reply by Art Page

"I haven't been able to work much on the boat, but I was able to complete the anchor…"

Art Page replied Nov 9 to 17-foot McKenzie drift boat

 31 Nov 10
Reply by Art Page

"Thanks.  Keep in mind I have zero rowing experience...I just hope they perform well.…"

Art Page replied Nov 5 to 17-foot McKenzie drift boat

 31 Nov 10
Reply by Art Page

"And after a few coats of varnish, the oars are done.... "

Art Page replied Nov 4 to 17-foot McKenzie drift boat

 31 Nov 10
Reply by Art Page

"Walnut was laminated to the square tops to add a little more counter-balance... An…"

Art Page replied Nov 4 to 17-foot McKenzie drift boat

 31 Nov 10
Reply by Art Page

"Added 6 oz cloth to the blade sections... "

Art Page replied Nov 4 to 17-foot McKenzie drift boat

 31 Nov 10
Reply by Art Page

"The blades are from some tight grained red wood I found in my lumber stash.  The pro…"

Art Page replied Oct 30 to 17-foot McKenzie drift boat

 31 Nov 10
Reply by Art Page

"The 2-1/4 diameter shaft is tapered down to 1-5/8 at the neck.  I didn't have a spok…"

Art Page replied Oct 28 to 17-foot McKenzie drift boat

 31 Nov 10
Reply by Art Page

"So I'm kinda dragging my feet on fully assembling the hull since I'll need to do thi…"

Art Page replied Oct 28 to 17-foot McKenzie drift boat

 31 Nov 10
Reply by Art Page

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service