Phillip Westendorf's Discussions (644)

Search Forum

View

Discussions Replied To (638) Replies Latest Activity

"Mike, When I fastened the sides to the frames , stem and transom I used West's Six-1…"

Phillip Westendorf replied Aug 4, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Mike, To mark the location of the screws put a small piece of masking tape on the wo…"

Phillip Westendorf replied Aug 3, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Take a look at my Posting "Dorf's Wooden Drift Boat"  Page 5 and 12 show a typical u…"

Phillip Westendorf replied Jul 22, 2015 to Tools

 11 Aug 4, 2015
Reply by Mike Thomas

"Lots of them! "

Phillip Westendorf replied Jul 21, 2015 to Tools

 11 Aug 4, 2015
Reply by Mike Thomas

"Mel; If your going to use a slow hardener you can warm up the resin prior to mixing…"

Phillip Westendorf replied Jul 18, 2015 to Epoxy question

 6 Jul 18, 2015
Reply by Mel Buchanan

"Mel, Either one is good.  I've used both on my DB and have had good results with eit…"

Phillip Westendorf replied Jul 17, 2015 to Epoxy question

 6 Jul 18, 2015
Reply by Mel Buchanan

"Richard, Can you tell us what brand of Bed Liner you have used with the Kevlar in it…"

Phillip Westendorf replied Jul 11, 2015 to Bottom Coating for Wooden Boats.

 7 Jul 25, 2015
Reply by Don Hanson

"Mike, Our rivers here in Michigan aren't all that fast flowing even in spring and yo…"

Phillip Westendorf replied Jun 22, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Mike, If you glass the side panels (before you secure them to the frame) you will NO…"

Phillip Westendorf replied Jun 18, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

"Craig, Thanks for the ideas.  I have some 80 grit sanding belts for my belt sander a…"

Phillip Westendorf replied Jun 4, 2015 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service