Lawrence E. Long's Discussions (324)

Search Forum

View

Discussions Replied To (320) Replies Latest Activity

"Seamus: I am interested in hearing more about your steaming and bending epoxy joints…"

Lawrence E. Long replied Jul 6, 2011 to Scarfing, Steaming & Cutting

 8 Jul 6, 2011
Reply by Seamus Walsh

"Ronald:   Based on my experience and "failures"  I would cut my stock to the dimenti…"

Lawrence E. Long replied Jul 5, 2011 to Scarfing, Steaming & Cutting

 8 Jul 6, 2011
Reply by Seamus Walsh

"Ronald:What are you using the 1x3x18 for?  If chines or gunwales I assume you will r…"

Lawrence E. Long replied Jul 5, 2011 to Scarfing, Steaming & Cutting

 8 Jul 6, 2011
Reply by Seamus Walsh

"Ronald:  The epoxy will never hold together in a steambox.  Try a sample and see if…"

Lawrence E. Long replied Jul 5, 2011 to Scarfing, Steaming & Cutting

 8 Jul 6, 2011
Reply by Seamus Walsh

"Dave: Quoting from Culler on oarmaking. " Sassafras, if you can find it(look around…"

Lawrence E. Long replied Jul 5, 2011 to Wood for Oars

 7 Jul 5, 2011
Reply by Rick Newman

"Boys:  I can't resist the temptation to join in this pi$$ing contest.  An oar is a m…"

Lawrence E. Long replied Jul 4, 2011 to First River trip

 13 Sep 23, 2011
Reply by Robb Grubb

"Well I managed to kick the hornets nest again. Whatever rows your boat go for it.  M…"

Lawrence E. Long replied Jun 16, 2011 to my first boat- priming/painting/varnishing? ply cunstruction flat bottom boat.

 14 Jun 18, 2011
Reply by Mike Collier

"Woodie Hindman is probably sitting upright in his grave."

Lawrence E. Long replied Jun 16, 2011 to my first boat- priming/painting/varnishing? ply cunstruction flat bottom boat.

 14 Jun 18, 2011
Reply by Mike Collier

"Christian:  I have never used a "factory" scarfed piece of PW.  There have been seve…"

Lawrence E. Long replied Jun 15, 2011 to Finger Jointed Plywood VS. The Scarf Joint

 13 Jun 21, 2011
Reply by Andrew

"Justin:  11-12 in from the     front of the seat  to the centerline of the lock and …"

Lawrence E. Long replied May 26, 2011 to oarlock spacing, formula??

 4 May 29, 2011
Reply by justin nicola

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service