Phillip Westendorf's Discussions (644)

Discussions Replied To (638) Replies Latest Activity

"Mike, You can just use a thickened epoxy.  Clamp it in position and do your trim wor…"

Phillip Westendorf replied Jun 4, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"Craig, I considered the heat gun but I don't want to remove all the epoxy and glass.…"

Phillip Westendorf replied Jun 4, 2015 to Dorf's Wooden Drift Boat

333 Jul 9, 2020
Reply by Phillip Westendorf

"Tungsten, Thanks for you feedback, it's appreciated!  I definitely put too much Grap…"

Phillip Westendorf replied Jun 4, 2015 to Dorf's Wooden Drift Boat

333 Jul 9, 2020
Reply by Phillip Westendorf

"Update 2015, Well I learned an important lesson today.  I pulled the boat off the tr…"

Phillip Westendorf replied Jun 2, 2015 to Dorf's Wooden Drift Boat

333 Jul 9, 2020
Reply by Phillip Westendorf

"David, If your building plywood I think that Titebond III will work, based upon the…"

Phillip Westendorf replied May 30, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"Mike, Having used Titebond III to glue up the frames I'd recommend that you coat the…"

Phillip Westendorf replied May 29, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"Eric, I assume you are referring to West System's Foam (color yellow) rollers you cu…"

Phillip Westendorf replied May 29, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"LEL, I'd use a floor mop or anything like it if it would give me the result I desire…"

Phillip Westendorf replied May 26, 2015 to Refinishing Sawyer Smoker Ash Dory Oars

14 May 26, 2015
Reply by Phillip Westendorf

"Mike, When you "glue up" the frames apply a thin coating of mixed (105/205) epoxy to…"

Phillip Westendorf replied May 17, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

"Mike, For coating the wooden components of the frame and interior of the boat most p…"

Phillip Westendorf replied May 17, 2015 to Mike`s Framed Drift Boat Build

315 Jun 23, 2016
Reply by Mike Thomas

RSS

© 2024   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service