tungsten's Discussions (373)

Search Forum

View

Discussions Replied To (367) Replies Latest Activity

"OK I'm confused now,you did all that work to get the second layer on.Now you plan on…"

tungsten replied Apr 17, 2013 to Dorf's Wooden Drift Boat

 333 Jul 9, 2020
Reply by Phillip Westendorf

"Thx Dorf,i'll have to read that a few times to get my head around it, something like…"

tungsten replied Apr 15, 2013 to Trailer Drawings

 118 Jul 13, 2019
Reply by Bennett Yarbrough

"Thinking back the last time I've arc welded I don't think I had internet.I've always…"

tungsten replied Apr 14, 2013 to Trailer Drawings

 118 Jul 13, 2019
Reply by Bennett Yarbrough

"Playing around a little more with the vertical welds,if I hold or pause just a littl…"

tungsten replied Apr 14, 2013 to Trailer Drawings

 118 Jul 13, 2019
Reply by Bennett Yarbrough

"Good point Rick,I can see the penetration as i'm welding so I think i'm good.I need…"

tungsten replied Apr 14, 2013 to Trailer Drawings

 118 Jul 13, 2019
Reply by Bennett Yarbrough

"Broke out the buzz box after getting some 7018AC and doing some reading on the tube.…"

tungsten replied Apr 14, 2013 to Trailer Drawings

 118 Jul 13, 2019
Reply by Bennett Yarbrough

"Thanks again Tom."

tungsten replied Apr 13, 2013 to Trailer Drawings

 118 Jul 13, 2019
Reply by Bennett Yarbrough

"If your shop is cool i'd say no problem you don't need to sand.All of the epoxy I've…"

tungsten replied Apr 13, 2013 to First stitch and glue project

 51 Apr 19, 2013
Reply by Rick Newman

"Thanks Tom,what about vertical welding with the 7018.Same thing can I just drag it u…"

tungsten replied Apr 13, 2013 to Trailer Drawings

 118 Jul 13, 2019
Reply by Bennett Yarbrough

"Thanks Tom,I had a look at my 115V welder ,best I can see is 88amp.Chart on the insi…"

tungsten replied Apr 13, 2013 to Trailer Drawings

 118 Jul 13, 2019
Reply by Bennett Yarbrough

RSS

© 2025   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service