David Witton's Discussions (248)

Search Forum

View

Discussions Replied To (242) Replies Latest Activity

"I took the traditional approach to the glueup, first saturating the joint with epoxy…"

David Witton replied Aug 8, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"I left the sacrificial under layer in place, and ran a strip of blue tape across its…"

David Witton replied Aug 7, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"OK, now it's time to scarf some plywood. I've been scratching my head about how to m…"

David Witton replied Aug 5, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"After the frames were assembled, I borrowed a tip from Kurt Selisch and made a jig t…"

David Witton replied Aug 1, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Tungsten - great suggestion, I'm headed off to the store!"

David Witton replied Aug 1, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"I had built kayaks back in the 70s using polyester resins, but I didn't have much ex…"

David Witton replied Jul 31, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"I made a simple jig to cut the limber holes...and another to taper the frame sides"

David Witton replied Jul 27, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"I made a living as a woodworker for years, so I've got a reasonable set of tools, bu…"

David Witton replied Jul 27, 2015 to 16' Double ender w/ transom

 181 Jul 26, 2021
Reply by David Witton

"Kurt Apparently McBeath's web site is a poor match for their inventory - I tried to…"

David Witton replied Jul 18, 2015 to Sapele marine plywood search

 8 Aug 1, 2015
Reply by Kurt Selisch

"Dorf I'm interested in waterproof wood glues, since I'm starting a build. Titebond I…"

David Witton replied May 30, 2015 to Mike`s Framed Drift Boat Build

 315 Jun 23, 2016
Reply by Mike Thomas

RSS

© 2026   Created by Randy Dersham.   Powered by

Badges  |  Report an Issue  |  Terms of Service